| Customization: | Available |
|---|---|
| Automatic Grade: | Full-Automatic |
| Control System: | PLC Control |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Technical specification for ZC106 manipulator
ZC106 Manipulator is high sealed detachable master and slave manipulator, handling weight is big, operating range is wide, balancing is good.
The manipulator can be sealed, with X axis, Y axis, Z axis electrical adjustment, operating range can reach more than 3.3 meters for slave arm, easy to disassembly, convenience for maintenance (Remote change jaw, change sleeve, remote replace slave arm);
:oCr18Ni9,LY12-CZ,Q235-A;
Main material: oCr18Ni9,LY12-CZ,Q235-A;
:
| Technical specification | ||
| Name | Technical specification | |
| 1.87m | ||
| Machine height | ||
| 2200mm | ||
| Arm raising: | Arm height (Max.) | |
| 2185mm | ||
| Height of upper claw edge | ||
| 1800mm | ||
| Max. Diameter | ||
| 1485mm | ||
| Arm down | Gripper height (Lowest point of arm) | |
| 2080mm | ||
| Max. Diameter | ||
| 80mm | ||
| Gripper opening | ||
| 8mm | ||
| Gripper closing | ||
| 170mm | ||
| Height of universal wheel | ||
| 1.2m | ||
| Base chassis diameter | ||
| 1600kg | ||
| Total weight | ||
| 550W | ||
| Motor power | ||
| 1390rpm | ||
| Motor rated speed | ||
| 380V/50Hz, three- phase | ||
| Motor working voltage | ||
| 3~10MPa | ||
| Hydraulic working pressure | ||
| ≥40L/m | ||
| Hydraulic Flow Rate | ||
| 0.7MPa | ||
| Air pressure | ||
| 30KW | ||
| Power supply | ||
| 380V/50Hz, three- phase | ||
| Power supply voltage: | ||
Power: 220V 50HZ
Used for big size, middle size hot cell;
Length of through wall tube and overhang can be made based on user requirement.
){kind=link}